• millia institute of technology

    Welcome
    Welcome to Millia Institute Of Technology , Rambagh Purnea...

  • millia institute of technology

    Welcome
    Welcome to Millia Institute Of Technology , Rambagh Purnea...

  • millia institute of technology

    Welcome
    Welcome to Millia Institute Of Technology , Rambagh Purnea...

  • millia institute of technology

    Welcome
    Welcome to Millia Institute Of Technology , Rambagh Purnea...

  • millia institute of technology

    Welcome
    Welcome to Millia Institute Of Technology , Rambagh Purnea...

  • millia institute of technology

    Welcome
    Welcome to Millia Institute Of Technology , Rambagh Purnea...

  • millia institute of technology

    Welcome
    Welcome to Millia Institute Of Technology , Rambagh Purnea...

Laboratories

MIT has excellent laboratory facilities for carrying out teaching, research and consultancy activities in various disciplines of engineering. The Institute has state of the art labs that allow the students to experiment and bring to practice what they have learnt in theory. The department of Mechanical engineering is broadly based on categories namely Design Engineering, Production engineering & Thermal Engineering. The importance of the aspect is sensed and developed in the laboratories of different fields. Few of the laboratories in the department are as follows:

  • • Engineering Drawing
  • • Engineering Mechanics
  • • Thermodynamics
  • • Strength of Material
  • • Theory of Machine
  • • Fluid Mechanics & Machiner
  • • Heat & Mass Transfer
  • • Refrigeration & Air Conditioning
  • • Internal Combustion Engine
  • • Control System & Measurement
  • • Machine Design
  • • Workshop
Laboratory Name : ENGINEERING DRAWING
Faculty Incharge : Saif Nawaz Ahmad
Objective : Drawing is the language of engineers. An engineer must be well conversant with drawings. Drawings represent reduced shape of structure and the owner will be able to see what is going to happen. It is the best possible way to prepare a concise record of the numerous architecture, and engineering works in a manner that can be readily understood and translated into reality by people whose duties commence when the designer and draughtsman have finished their work.
Laboratory Name : ENGINEERING MECHANICS
Faculty Incharge : Md Tabrez
Objective :Engineering mechanics provides a broad basic scientific background which enables its graduate to explore fundamental question in most field of engineering
  • 1. Title: Compound pendulum
  • Aim: To determine the value of acceleration due to gravity ‘g’
  • 2. Title: Reaction at supports
  • Aim: Determination of reaction of a simply supported beam and draw diagram
  • 3. Title: Universal force table
  • Aim: Verification of lamie’s theorem, triangle and polygon law of forces
  • 4. Title: Flywheel
  • Aim: Determination of mass moment of inertia of a flywheel
  • 5. Title: Friction Table
  • Aim: Determination of coefficients of static friction between different pair of wood surfaces
Laboratory Name : THERMODYNAMICS
Faculty Incharge : Md. Tabrez
Objective :Engineering thermodynamics makes our engineer to transform source of energy in different useful specified field and mainly focus on
  • a) Improvement of efficiency process
  • b) Making the process more nonpolluting and environmental friendly
  • c) Study and research regarding alternative energy sources and transformation method

List of experiment:-

  • 1. Calorific value of fuel
  • Aim : Study of determination of calorific value of fuel by using different calorimeter
  • 2. Exhaust gas analysis
  • Aim : Determination of exhaust gas analysis of using Orsat apparatus
  • 3. Study of solar energy device
  • 4. Dryness fraction
  • Aim : Determination of dryness fraction by using different calorimeter
  • 5. Assignment of topic
  • i. Entropy
  • ii. Air standard cycle
  • 6. Operation of Steam Boiler, Study of Steam Properties
  • 7. Performance of a Basic Refrigeration System – Cooling Operation
  • 8. Thermodynamic Performance of Air Compressor
  • 9. Performance of Cooling Tower.
  • 10. Performance of enthalpy during flow through Nozzle & Condenser.
Laboratory Name : STRENGTH OF MATERIALS
Faculty Incharge : Md Obaidur Rahman
Objective :The main objective of this lab is to testing the mechanical properties of engineering materials at different loads as well as demonstrates the basic principles in the area of strength and mechanics of materials and structural analysis to students through a series of experiments. Tests such as the tension tests of a steel coupon, torsion of model circular sections and bending of a steel bar are conducted in the lab. Model truss and frames are also employed to illustrate the theory in structural analysis and the basic plastic theory of bending.
  • (1) Title: Rockwell Hardness test
  • Aim: To determine the Hardness of the given Specimen using Rockwell hardness test
  • (2) Title:Brinell hardness test
  • Aim: To determine the hardness of the given specimen using Brinell hardness test.
  • (3) Title: Impact test
  • Aim: To determine the impact strength of the given specimen by conducting Charpy test.
  • (4) Title: Tension test
  • Aim: To conduct tension test on the given steel specimen for determining the
  • 1. Stress at yield point.
  • 2. Ultimate stress.
  • 3. Nominal breaking stress.
  • 4. Actual breaking stress.
  • 5. Percentage elongation.
  • 6. Percentage reduction in area.
  • 7. Young’s modulus
  • (5) Title: Torsion test
  • Aim: To find out the shear stress and rigidity modulus of the given material using the torsion testing machine.
  • (6) Title: Compression test
  • Aim: To determine the ultimate crushing strength of concrete and wood.
  • (7) Title: Deflection Test
  • Aim: To determine the young’s modulus and bending stress for the given steel beam by conducting deflection test.
  • (8) Title: Shear test
  • Aim: To find the shear strength of given specimen under double shear.
  • (9) Title: Spring Test
  • Aim: To determine the stiffness of the spring and modulus of rigidity of the spring wire.
Laboratory Name : THEORY OF MACHINE
Faculty Incharge : Lokesh Nath Jha
Objective :The main objective of theory of machine lab is to impart practical knowledge on analysis of mechanisms for the specified type of motion in a machine. With the study of rigid bodies’ motion and force for the transmission systems, machine kinematics and dynamics can be well understood.
  • (1) Title: Whirling speed of shaft
  • Aim: To determine whirling speed of shaft theoretically and experimentally.
  • (2) Title:Porter & Proell Governor Apparatus
  • Aim: To determine the position of sleeve against controlling force and speed of Porter & Proell governor and to plot the characteristic curve of radius of rotation
  • (3) Title: natural frequency of undamped torsional vibration
  • Aim: To determine the natural frequency of undamped torsional vibration of a single rotor shaft system.
  • (4) Title: natural frequency of undamped torsional vibration
  • Aim: To determine the natural frequency of undamped torsional vibration of two rotor shaft system.
  • (5) Title: motion of a motorized gyroscope
  • Aim: To analyse the motion of a motorized gyroscope when the couple is applied along its spin axis.
  • (6) Title: frequency of undamped free vibration
  • Aim: To determine the frequency of undamped free vibration of an equivalent spring mass system.
  • (7) Title: Frequency of damped force vibration
  • Aim: To determine the frequency of damped force vibration of a spring mass system.
  • (8) Title:Static and dynamic balancing
  • Aim: To study the static and dynamic balancing using rigid blocks.
Laboratory Name : FLUID MECHANICS & MACHINERY
Faculty Incharge : Md Rabnawaz Ahmad
Objective :The main objective of fluid mechanics and hydraulic machines lab is to build fundamental concepts combined with strong analytical and problem solving abilities that would form the backbone of many other subjects in higher educations. It is an introductory course where flow behavior, fluid forces and analysis tools are introduced. The goals of the experiments include determination of forces generated when fluid flow takes place over a solid object, applications of the control volume approach, demonstration of the momentum and energy equations, viscosity measurement and engineering correlations. The lab experiments utilize U-tube manometer and digital manometer, and hot-wire anemometer system. A large number of experiments could be performed in the laboratory to demonstrate the principles of hydraulics and fluid mechanics deals with the different experiments.
  • (1) Title: Orifice meter
  • Aim: Determination of coefficient of discharge of given orifice meter.
  • (2) Title:Venturi meter
  • Aim:Determination of coefficient of discharge of given orifice meter.
  • (3) Title: Frictional Loss in Pipe
  • Aim: Determine the friction factor of a given set of a pipe.
  • (4) Title: Metacentric height
  • Aim: To determine the metacentric height of a ship model.
  • (5) Title: Bernoulli’s Equation
  • Aim: To prove that the total head at any point along the flow is same.
  • (6) Title: V notch Apparatus
  • Aim: To determine the discharge through V- notch.
  • (7) Title:Reciprocating Pump Test Rig
  • Aim: To conduct a test at various head of given reciprocating pump and to find its overall efficiency.
  • (8) Title:Centrifugal Pump Test Rig
  • Aim: To conduct a test at various head of given single stage centrifugal pump and to find its overall efficiency.
  • (9) Title:Pelton Turbine Test Rig
  • Aim: To conduct performance test on the given Pelton wheel turbine and find its overall efficiency.
  • (10) Title:Kaplan Turbine Test Rig
  • Aim:To study the characteristics curve of a Kaplan turbine at constant head condition.
  • (11) Title:Francis Turbine Test Rig
  • Aim: To conduct performance test and overall efficiency of the given Francis turbine.
Laboratory Name : HEAT & MASS TRANSFER
Faculty Incharge : Manav Kumar
Objective :Heat Transfer is one of the important subjects which is commonly applied in renewable energy, industrial, commercial and domestic systems and provides fundamental knowledge about modes of heat transfer, like conduction, convection and radiation, and their application.The experiments are designed to provide exposure of practical aspects of the various theoretical concepts developed under the course. The laboratory consists of experiments on various conductive, convective, radiative, boiling and condensing mechanisms of heat transfer. Students will be expected to develop the following skills/understanding upon the successful completion of this experiment. The expected outcome of lab is that the students will be able to practically relate to concepts discussed in the Heat & Mass Transfer course.
  • (1) Title: Thermal Conductivity of Metal Rod:
  • Aim: To determine the thermal conductivity of a metallic rod.
  • (2) Title:Composite Wall Apparatus
  • Aim:To determine the Overall Thermal Conductivity of Composite wall.
  • (3) Title: Natural Convection
  • Aim: To determine the surface heat transfer coefficient for a heated vertical tube under natural convection and plot the variation of local heat transfer coefficient along the length of the tube. Also compare the results with those of the correlation.
  • (4) Title:Emissivity Measurement
  • Aim: To measure the emissivity of the gray body (plate) at different temperature and plot the Variation of emissivity with surface temperature.
  • (5) Title:Parallel Flow & Counter Flow Heat Exchanger
  • Aim: To find overall heat transfer coefficient and effectiveness of a heat exchange under parallel and counter flow conditions. Also plot the temperature distribution in both the cases along the length of heat of heat exchanger.
  • (6) Title: Heat Transfer Through Pin – Fin
  • Aim:To find the effectiveness of a pin fin in a rectangular duct under forced convective and plot temperature distribution along its length.
  • (7) Title:Heat Transfer Through Forced Convection
  • Aim: To determine average heat transfer coefficient for a externally heated horizontal pipe under forced convection & plot Reynolds and Nusselt numbers along the length of pipe. Also compare the results with those of the correlations.
  • (8) Title:Thermal Conductivity of an Insulating Power
  • Aim: To determine the thermal conductivity of an insulating power.
  • (9) Title:Thermal Conductivity of a Solid by the Guarded Hot Plate Method.
  • Aim: To determine the thermal conductivity of a solid by the guarded hot plate method.
  • (10) Title:Heat Pipe Apparatus
  • Aim:To demonstrate the super thermal conducting heat pipe and compare its working with that of the best conductor i.e. copper pipe. Also plot temperature variation along the length with time or three pipes.
Laboratory Name : REFRIGERATION & AIR CONDITIONING
Faculty Incharge : Manav Kumar
Objective :This lab help students to study the performance of a vapour compression cycle under various conditions of evaporator load and condenser pressure. Student will be able to monitor and control the unit just as if they are controlling and monitoring an industrial refrigeration and air conditioning plant.
  • (1) Title: Vapour Compression Refrigeration Test Rig
  • Aim: To determine the C.O.P. and draw P-H and T-S diagrams for the vapour compression Refrigeration System.
  • (2) Title:Vapour Absorption Refrigeration Test Rig
  • Aim:To determine the C.O.P. and draw P-H and T-S diagrams for the vapour compression Refrigeration System.
  • (3) Title: Ice Plant Test Rig
  • Aim: To find the C.O.P. and capacity of an Ice- plant.
  • (4) Title: Heat Pump Test Rig
  • Aim: To find the C.O.P. of the Mechanical heat pump, Air and Water heat pumps.
  • (5) Title: Water Cooler Test Rig
  • Aim: To find the C.O.P. of Water cooler.
  • (6) Title: Chilling plant Test Rig
  • Aim: To study the chilling plant and its working cycle.
  • (7) Title:Psychrometry and Psychrometric Process
  • Aim: To analyze the humidification, heating, cooling and dehumidification processes and plot them on Psychrometric charts.
  • (8) Title:Heating and Cooling Coil
  • Aim: To study and find the By Pass factor of heating & cooling coils & plot them on psychometric chart for different inlet condition.
  • (9) Title:Refrigerant Compressor
  • Aim: To study the cut-sectional models of Reciprocating and Rotary Refrigerant compressor.
  • (10) Title:Controlling of RAC System.
  • Aim:To analyze the various controls used in Refrigerating & Air Conditioning systems.
Laboratory Name : MACHINE DESIGNE
Faculty Incharge : Lokesh Nath Jha
Objective :The objective of this lab is to design the components of any machines with the utilization of concepts of stress analysis, theory of failure and material science analyze. The components are design with great care because rupture of components means may cause loss of property and/or life. The designed components then draw on drawing sheet with actual dimensions for manufacturing them.

List of experiment:-

  • 1. To design and draw The Cotter and Knuckle Joints.
  • 2. To design and draw The Shafts
  • 3. To design and draw The Key and Coupling of Shafts
  • 4. To design and draw The Levers for shifting the object.
  • 5. To design and draw The Belt and Rope Drive.
  • 6. To design and draw The Riveted Joints.
  • 7. To design and draw The Welded Joints
  • 8. To design and draw The Pipes and Pipes Joints.
  • 9. To design and draw The Pressure Vessels.
  • 10. To design and draw The Power Screws for lifting the object
  • 11. To design and draw The Chain Drives
  • 12. To design and draw The Helical Spring and Leaf Spring.
  • 13. To design and draw The Clutches and Brakes.
  • 14. To design and draw The Spur gear, Helical gear and Bevel gear.
  • 15. To design and draw The Gear Box
  • 16. To design and draw The Sliding contact bearing and Rolling contact bearing.
  • 17. To design and draw The Cylinder, Piston, Connecting rod and Crankshaft.
  • 18. To design and draw The Flywheel.
  • 19. To design and draw The Centrifugal Pump.
  • 20. To design and draw The Hydraulic Press.
Laboratory Name : INTERNAL COMBUSTION ENGINE
Faculty Incharge : Manav Kumar
Objective :The objective of the laboratory is to run an engine test, and to learn how to use engine performance evaluation parameters and procedures with some familiarity to a real engine behavior. Also in this lab, there is provision of operating the engine at various load condition and to measure the exhaust gas emissions. The objective of this lab is With these parameters and procedures one can gain insight on the general characteristics of the cycle as well as the performance of a particular engine.
  • 1. To run an engine test, and to learn how to use engine performance evaluation parameters and procedures.
  • 2. To study the constructional details and working principle of two stroke petrol/ four stroke petrol engine.
  • 3. To study the constructional details and working principle of two stroke diesel/ four stroke diesel engine.
  • 4. To study and draw the valve timing diagram of four stroke single cylinder diesel engine.
  • 5. Analysis of exhaust gases from single cylinder/multi cylinder petro engine by Orsat apparatus.
  • 6. To prepare variable speed performance test of a multi-cylinder/ single cylinder petrol/ diesel engine and prepares the curve (i) BHP, IHP, FHP Vs Speed (ii) Volumetric efficiency and indicated specific fuel consumption Vs Speed.
  • 7. To find FHP of multi-cylinder of diesel/ petrol engine by Willian’s line and Motoring method.
  • 8. To prepare heat balance sheet on multi cylinder diesel engine/ petrol engine.
  • 9. To find the indicated horse power on multi-cylinder diesel/ petrol engine by Morse test.
  • 10. Experimental Study on the effect of fuel injection pressure on the Engine Performance, Heat Transfer and Emission Characteristics.
  • 11. Experimental Study on the effect of preheating air and fuel on Engine Performance, Heat Transfer and Emission Characteristics.
  • 12. Determination of Volumetric efficiency and Equivalence ratio in a single cylinder D.I. Diesel engine.
  • 13. Determination of Flash and Fire point of various fuel blends.
  • 14. Determination of viscosity of various fuel blends
Laboratory Name : CONTROL SYSTEM & MEASUREMENT
Faculty Incharge : Md Rabnawaz Ahmad
Objective :The purpose of this lab activity is to practice, using a metering tape, meter stick, vernier caliper and a micrometer for recording measurement with a proper number of significant digit.

List of experiment:-

  • 1. Determination of discharge by flow meter
  • 2. Temperature measurement system
  • 3. Pressure measurement bench
  • 4. Different type of meter
Laboratory Name : WORKSHOP
Faculty Incharge : Manav Kumar
Objective :
The objective of workshop to give real life practical exposure to the students. It is equipped with the latest machines that are required in different fields of engineering.

Machine shop:
This shop includes machines like lathe machine, milling machine, shaper machine, drilling machine etc. In this lab students learn about different types of machining operations such as turning, facing, drilling, gear cutting, threading, slot cutting, grinding, knurling, boring, grooving etc.

Welding Shop:
Welding shop is equipped with various welding machines like arc welding machine, gas welding machine, TIG, MIG etc. In this lab student learns about different types of welding joints, their defects and remedies.

Foundry shop:
This shop includes different type of furnaces, mould, patterns and hand tools like showel, trowels, lifter, riddle, rammer, slicks, smoother etc. In this lab student learn about different types of casting process and their defects and various types of mould and pattern making.

Sheet metal shop:
In this shop various types of marking tools(steel rule, scriber, divider etc.), striking tools(hammer, mallet etc.), supporting tools(hand stake, taper stake, grooving stake) and various machines like rolling and bending machine, universal cutting machine, swaging machine etc. In this lab students works on different type of sheet metal operations like measuring and marking, cutting and shearing, nibbling, piercing and blanking, bending etc.

Fitting Shop:
In fitting shop unwanted material is removed with the help of hand tools. It is done for mating, repair and manufacturing purposes. This lab is equipped with different types of clamping tools (like bench vice, leg vice, hand vice, pin vice etc.), measuring and marking tools (like try square, bevel protector, combination set, vernier caliper, micrometer etc.), cutting tools (like hacksaw, files, chisels etc.), striking tools (different types of hammers) and miscellaneous tools.

Carpentry shop:
This shop includes different types of hand tools like wooden jack planner, handsaw, G-clamp, T-square, marking gauge, adze etc. In this lab students go through different types of woods, their defects and different types of wooden joint(butt joint, corner joint, dove tail joint , lap joint, bridal joint).

Smithy Shop:
This shop includes tools like hammers, anvils etc. In this shop hand forging process which is also known as black-smithy work which is commonly employed for production of small articles using hammers on heated jobs. It is a manual controlled process even though some machinery such as power hammers can also be sometimes used.

Hit Counter
Hit Counter
Anti Ragging Cell
Anti Ragging Cell